HP Pavilion 15-cc600 Maintenance and Service Guide - Page 66
USB port board cable, Remove the USB port board cable
View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
USB port board cable NOTE: The USB port board spare part kit does not include the USB port board cable. The USB port board cable is available using spare part numbers 926842-001. Before removing the USB port board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 36), and then remove the following components: a. Bottom cover (see Bottom cover on page 37) b. Battery (see Battery on page 39) c. Solid-state drive (see Solid-state drive on page 43) d. Fan (see Fan on page 49) e. System board (see System board on page 50) Remove the USB port board cable: 1. Turn the system board upside down with the front toward you. 2. Release the ZIF connector (1) to which USB port board cable is connected, and then disconnect the USB port board cable (2) from the audio jack board. 3. Remove the USB port board cable. Reverse this procedure to install the USB port board cable. 58 Chapter 5 Removal and replacement procedures