HP Pavilion 15-cc600 Maintenance and Service Guide - Page 54

USB port board, Release the ZIF connector

Get HP Pavilion 15-cc600 PDF manuals and user guides View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Reverse this procedure to install a memory module. USB port board Description USB port board (includes power light actuator, hard drive light actuator, card reader slot, and USB port; does not include USB port board cable) NOTE: The USB port board cable is available using spare part number 926842-001. Spare part number 926854-001 Before removing the USB port board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 36). 5. Remove the bottom cover (see Bottom cover on page 37). 6. Remove the battery (see Battery on page 39). Remove the USB port board: 1. Release the ZIF connector (1) to which the USB port board cable is connected, and then disconnect the USB port board cable from the USB port board. 2. Remove the USB port board (2). Reverse this procedure to install the USB port board. 46 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Reverse this procedure to install a memory module.
USB port board
Description
Spare part number
USB port board (includes power light actuator, hard drive light actuator, card reader slot, and USB port;
does not include USB port board cable)
926854-001
NOTE:
The USB port board cable is available using spare part number 926842-001.
Before removing the USB port board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the optical drive (see
Optical drive
on page
36
).
5.
Remove the bottom cover (see
Bottom cover
on page
37
).
6.
Remove the battery (see
Battery
on page
39
).
Remove the USB port board:
1.
Release the ZIF connector
(1)
to which the USB port board cable is connected, and then disconnect
the USB port board cable from the USB port board.
2.
Remove the USB port board
(2)
.
Reverse this procedure to install the USB port board.
46
Chapter 5
Removal and replacement procedures