HP Pavilion 15-cc600 Maintenance and Service Guide - Page 60
Solid-state drive see, When replacing the system board
View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Description Spare part number Equipped with an Intel Core i5-7200U 2.50-GHz (turbo up to 3.10-GHz) dual core processor (2133-MHz 926275-001 FSB, 4.0-GB L3 cache, 15-W), an Intel HD Graphics 620 graphics subsystem with UMA video memory, and a non-Windows operating system Equipped with an Intel Core i3-7100U 2.40-GHz dual core processor (2133-MHz FSB, 3.0-GB L3 cache, 15-W), an Intel HD Graphics 620 graphics subsystem with UMA video memory, and the Windows 10 operating system 926276-601 Equipped with an Intel Core i3-7100U 2.40-GHz dual core processor (2133-MHz FSB, 3.0-GB L3 cache, 15-W), an Intel HD Graphics 620 graphics subsystem with UMA video memory, and a non-Windows operating system 926276-001 Equipped with an Intel Pentium 4415U 2.30-GHz dual core processor (2133-MHz FSB, 2.0-GB L3 cache, 15-W), an Intel HD Graphics 610 graphics subsystem with UMA video memory, and the Windows 10 operating system 926277-601 Equipped with an Intel Pentium 4415U 2.30-GHz dual core processor (2133-MHz FSB, 2.0-GB L3 cache, 15-W), an Intel HD Graphics 610 graphics subsystem with UMA video memory, and a non-Windows operating system 926277-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 36), and then remove the following components: a. Bottom cover (see Bottom cover on page 37) b. Battery (see Battery on page 39) c. Hard drive (see Hard drive on page 40) d. Solid-state drive (see Solid-state drive on page 43) e. Fan (see Fan on page 49) When replacing the system board, be sure to remove the following components from the defective system board and install them on the replacement system board: ● WLAN module (see WLAN module on page 42) ● Memory module (see Memory module on page 44) ● Heat sink (see Heat sink on page 55) ● USB port board cable (see USB port board cable on page 58) Remove the system board: 1. Disconnect the following cables from the system board: (1) Power connector cable (2) WLAN antenna cables 52 Chapter 5 Removal and replacement procedures