HP Pavilion 15-cc600 Maintenance and Service Guide - Page 56
Remove the TouchPad, the TouchPad cable from the system board.
View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
TouchPad Description Spare part number For use only on computer models with model numbers 15-cc1xx and 15-cc6xx (This TouchPad spare L01117-001 part kit includes the TouchPad cable but does not include the TouchPad bracket. The TouchPad bracket is available using spare part number 926851-001.) For use only on computer models with model numbers 15-cc0xx and 15-cc5xx (This TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad bracket is available using spare part number 926851-001. The TouchPad cable is available using spare part number 926843-001.) 926853-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 36). 5. Remove the bottom cover (see Bottom cover on page 37). 6. Remove the battery (see Battery on page 39). Remove the TouchPad: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Remove the three Phillips PM2.0×2.2 broad head screws (2) that secure the TouchPad to the keyboard/ top cover. 3. Remove the three Phillips PM2.0×2.9 screws (3) that secure the TouchPad and TouchPad bracket to the keyboard/top cover. 4. Remove the TouchPad bracket (4) . 48 Chapter 5 Removal and replacement procedures