HP Pavilion TouchSmart 11-e140ca HP 210 G1 Notebook PC HP Pavilion 11 Notebook - Page 52
Hard drive, Disconnect the hard drive connector cable
View all HP Pavilion TouchSmart 11-e140ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, and screws. These components are included in the Hard Drive Hardware Kit, spare part number 731424-001. Description 500 GB, 5400 rpm, 7.0 mm, for use on all computer models 320 GB, 5400 rpm, 7.0 mm, for use only on HP Pavilion TouchSmart 11 Notebook, HP Pavilion 11 Notebook, or HP 215 G1 Notebook PC computer models Spare part number 683802-001 645193-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the service door (see Service door on page 41). Remove the hard drive: 1. Disconnect the hard drive connector cable (1) from the system board. 2. Release the hard drive connector cable from the routing channel (2) built into the base enclosure. 3. Remove the four Phillips PM2.0×2.75 screws (3) that secure the hard drive to the computer. 42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts