HP Pavilion TouchSmart 11-e140ca HP 210 G1 Notebook PC HP Pavilion 11 Notebook - Page 78

Fan, from the system board.

Get HP Pavilion TouchSmart 11-e140ca PDF manuals and user guides View all HP Pavilion TouchSmart 11-e140ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Fan Description Fan (includes cable and cowling) Spare part number 730903-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Service door (see Service door on page 41) b. Display assembly (see Display assembly on page 53) c. Bottom cover (see Bottom cover on page 61) Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Detach the cowling tape (2) that secures the fan to the heat sink. 3. Remove the two Phillips PM2.0×4.5 screws (3) that secure the fan to the system board. 4. Remove the fan (4). Reverse this procedure to install the fan. 68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
Fan
Description
Spare part number
Fan (includes cable and cowling)
730903-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
40
), and then remove the following components:
a.
Service door (see
Service door
on page
41
)
b.
Display assembly (see
Display assembly
on page
53
)
c.
Bottom cover (see
Bottom cover
on page
61
)
Remove the fan:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Detach the cowling tape
(2)
that secures the fan to the heat sink.
3.
Remove the two Phillips PM2.0×4.5 screws
(3)
that secure the fan to the system board.
4.
Remove the fan
(4)
.
Reverse this procedure to install the fan.
68
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts