HP Pavilion dv6-2100 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 67

panel cable, and disconnect the display panel cable, from the display

Page 67 highlights

Removal and replacement procedures 11. If it is necessary to replace the display hinges, remove the two Phillips PM2.0×3.0 screws 1 that secure each display hinge to the display panel. 12. Remove the display hinges 2. The display hinges are available in the Display Hinge Bracket Kit, spare part 574556-001. The display hinge screws are available in the Display Screw Kit, spare part number 512362-001. 13. If it is necessary to remove the display panel cable, remove the adhesive reinforcement strip 1 from the display panel cable, and disconnect the display panel cable 2. Remove the tape 3 that secures the cable to the display panel. The display panel cable is available using spare part number 574554-001. Reverse this procedure to reassemble and install the display assembly. 4-28 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129

4–28
Maintenance and Service Guide
Removal and replacement procedures
11. If it is necessary to replace the display hinges, remove the two Phillips PM2.0×3.0 screws
1
that secure each
display hinge to the display panel.
12. Remove the display hinges
2
. The display hinges are available in the Display Hinge Bracket Kit, spare part
574556-001. The display hinge screws are available in the Display Screw Kit, spare part number 512362-001.
13.
If it is necessary to remove the display panel cable, remove the adhesive reinforcement strip
1
from the display
panel cable, and disconnect the display panel cable
2
. Remove the tape
3
that secures the cable to the display
panel. The display panel cable is available using spare part number 574554-001.
Reverse this procedure to reassemble and install the display assembly.