HP Pavilion dv6-2100 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 68
Speaker, Remove the Phillips PM2.5×4.0 screw
View all HP Pavilion dv6-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Speaker Removal and replacement procedures Description Speaker assembly Spare part number 533865-001 Before removing the speaker assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the following components: a. Optical drive (see "Optical drive" on page 4-9) b. Hard drive (see "Hard drive" on page 4-15) c. Switch cover and keyboard (see "Switch cover and keyboard" on page 4-20). d. Display assembly (see "Display assembly" on page 4-25) Remove the speaker: 1. Turn the computer right side up, with the front toward you. 2. Disconnect the speaker cable from the system board 1. 3. Remove the four Phillips PM2.5×6.0 screws 2 that secure the speaker to the top cover. 4. Remove the Phillips PM2.5×4.0 screw 3 that secures the speaker to the top cover. 5. Lift the speaker up and off the top cover 4. Reverse this procedure to install the speaker. Maintenance and Service Guide 4-29