HP Pavilion dv6-2100 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 70
of the top cover until it rests at an angle., Remove the top cover
View all HP Pavilion dv6-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4. Turn the computer right-side up, with the front toward you. 5. Disconnect the following cables from the system board: 1 TouchPad board cable 2 Fingerprint reader board cable ✎ The cable connects to a LIF connector on the system board. Removal and replacement procedures 6. Remove the four Phillips PM2.5×4.0 screws that secure the top cover to the computer. 7. Lift the rear edge 1 of the top cover until it rests at an angle. 8. Remove the top cover 2 by lifting it straight up. Maintenance and Service Guide 4-31
Removal and replacement procedures
Maintenance and Service Guide
4–31
4. Turn the computer right-side up, with the front toward you.
5. Disconnect the following cables from the system board:
1
TouchPad board cable
2
Fingerprint reader board cable
✎
The cable connects to a LIF connector on the system board.
6. Remove the four Phillips PM2.5×4.0 screws that secure the top cover to the computer.
7. Lift the rear edge
1
of the top cover until it rests at an angle.
8. Remove the top cover
2
by lifting it straight up.