HP Pavilion x360 - 13-a155cl HP Pavilion x360 Convertible PC - Maintenance and - Page 38

to which the keyboard cable is attached, and then disconnect the, Release the ZIF connector

Get HP Pavilion x360 - 13-a155cl PDF manuals and user guides View all HP Pavilion x360 - 13-a155cl manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

7. Open the computer. CAUTION: Do not completely separate the keyboard/top cover from the bottom cover in the next step. There are 2 ribbon cables connecting the keyboard/top cover to the system board that can be damaged if too much separation is achieved. 8. Lift the front edge (1) of the keyboard/top cover until it (2) separates from the bottom cover. 9. Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the system board. 10. Release the ZIF connector (2) to which the keyboard cable is attached, and then disconnect the keyboard cable from the system board. 11. Remove the keyboard/top cover. Reverse this procedure to install the keyboard/top cover. 32 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
7.
Open the computer.
CAUTION:
Do not completely separate the keyboard/top cover from the bottom cover in the
next step. There are 2 ribbon cables connecting the keyboard/top cover to the system board that
can be damaged if too much separation is achieved.
8.
Lift the front edge
(1)
of the keyboard/top cover until it
(2)
separates from the bottom cover.
9.
Release the zero insertion force (ZIF) connector
(1)
to which the TouchPad cable is attached,
and then disconnect the TouchPad cable from the system board.
10.
Release the ZIF connector
(2)
to which the keyboard cable is attached, and then disconnect the
keyboard cable from the system board.
11.
Remove the keyboard/top cover.
Reverse this procedure to install the keyboard/top cover.
32
Chapter 5
Removal and replacement procedures