HP Pavilion x360 - 13-a155cl HP Pavilion x360 Convertible PC - Maintenance and - Page 54

Power connector cable, and then unplugging the AC adapter from the computer.

Get HP Pavilion x360 - 13-a155cl PDF manuals and user guides View all HP Pavilion x360 - 13-a155cl manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

d. Release the WLAN antenna cables from the retention clips (4) and channels built into the top edge and right side of the display back cover. e. Remove the WLAN antenna cables and transceivers. The WLAN antenna cables and transceivers are included in the Antenna Kit, spare part number 768033-001. Reverse this procedure to reassemble and install the display assembly. Power connector cable Description Power connector cable Spare part number 768012-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 30). 5. Disconnect the battery cable from the system board (see Battery on page 34). 6. Remove the display assembly (see Display assembly on page 42). Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 48 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
d.
Release the WLAN antenna cables from the retention clips
(4)
and channels built into the
top edge and right side of the display back cover.
e.
Remove the WLAN antenna cables and transceivers.
The WLAN antenna cables and transceivers are included in the Antenna Kit, spare part
number 768033-001.
Reverse this procedure to reassemble and install the display assembly.
Power connector cable
Description
Spare part number
Power connector cable
768012-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
30
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
34
).
6.
Remove the display assembly (see
Display assembly
on page
42
).
Remove the power connector cable:
1.
Disconnect the power connector cable
(1)
from the system board.
48
Chapter 5
Removal and replacement procedures