HP Photosmart 612 HP Photosmart 612 digital camera - (English) User Guide - Page 41
Unloading images to a Macintosh computer - usb cable
View all HP Photosmart 612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
To connect the camera to a Macintosh computer 1 Make sure the camera is turned off. 2 Plug the smaller end of the USB cable (supplied) into the camera. 3 Plug the flat end of the cable into any USB port on your computer. Note When the camera is connected to your computer, only the power control operates. The other camera buttons do not respond. Unloading images to a Macintosh computer Unloading images is the process of copying images from the camera to your computer. If you have a CF memory card installed in the camera, images will be copied from the CF memory card to the computer. You can unload images from your camera in one of two ways: automatically or by mounting the camera as a disk drive. The automatic unload procedure is the preferred method. Tip To conserve battery power, you can use an HP- approved ac power adapter (optional) when you are unloading images to your computer. To automatically unload images to a Macintosh computer 1 Connect the camera to your computer by using the USB cable. 2 Turn on the camera. The status LCD displays PC to indicate the camera is connected to a computer. Sharing and printing images 33