HP Pro 3400 HP Pro 3400 Microtower PC, HP Pro 3405 Microtower PC, HP Pro 3410 - Page 124
Preparation for Disassembly, on Access Panel, Memory, Expansion Card, Fan Sink, Processor
View all HP Pro 3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
System Board Description System board (includes thermal material) Spare part number 665223-001 The system board is secured to the computer with six screws. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 79). 2. Remove the access panel (Access Panel on page 80). 3. When replacing the system board, make sure the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules (seeMemory on page 83) ● Expansion cards (Expansion Card on page 88) ● Heat sink (Fan Sink on page 108) ● Processor (Processor on page 110) 4. Remove the fan from the chassis (Fan Assembly on page 106). 5. Rotate the drive cage to its upright position. 6. Rotate the power supply to its full upright position. 7. Disconnect all data and power cables from the system board. 8. Disconnect the balance of the cables from the system board. 114 Chapter 8 Removal and Replacement Procedures - Small Form Factor (SFF) Chassis