HP Pro 3400 HP Pro 3400 Microtower PC, HP Pro 3405 Microtower PC, HP Pro 3410 - Page 125
Removing the system board
View all HP Pro 3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
9. Remove the six screws that secure the system board to the chassis. NOTE: System board appearance may vary. Figure 8-37 Removing the system board screws 10. Slide the system board away from the rear of the computer to disengage the ports, and then lift the board up and out of the chassis. Figure 8-38 Removing the system board To install the system board, reverse the removal procedure. System Board 115
9.
Remove the six screws that secure the system board to the chassis.
NOTE:
System board appearance may vary.
Figure 8-37
Removing the system board screws
10.
Slide the system board away from the rear of the computer to disengage the ports, and then lift
the board up and out of the chassis.
Figure 8-38
Removing the system board
To install the system board, reverse the removal procedure.
System Board
115