HP Pro 3400 HP Pro 3400 Microtower PC, HP Pro 3405 Microtower PC, HP Pro 3410 - Page 73
Front I/O and USB Panel Housing Assembly
View all HP Pro 3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Front I/O and USB Panel Housing Assembly Description Front I/O and USB assembly without card reader Front I/O and USB assembly with card reader Spare part number 667853-001 667852-001 1. Prepare the computer for disassembly (Preparation for Disassembly on page 42). 2. Remove the access panel (Access Panel on page 43) 3. Lay the computer on its side with the front facing toward you. 4. Remove the front bezel (Front Bezel on page 44). 5. Remove the cables from the metal clip built into the bottom of the chassis, and then unplug the three cables that connect the assembly to the system board. The assembly cables connect to the following system board connectors: Table 7-8 Front I/O connectors HP Pro 3400/3410 models F_AUDIO - yellow connector F_USB2 - white connector F_USB3 - white connector HP Pro 3405 models F_AUDIO - yellow connector F_USB1 - white connector F_USB4 - white connector Figure 7-17 Front I/O connectors- HP Pro 3400/3410 models[3400 shown) Front I/O and USB Panel Housing Assembly 63