HP Pro 3400 HP Pro 3400 Microtower PC, HP Pro 3405 Microtower PC, HP Pro 3410 - Page 58
Removal and Replacement Procedures - Microtower Chassis,
View all HP Pro 3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4. Open both latches (1) of the memory module socket , and remove the memory module from the socket (2). Figure 7-4 Removing a DIMM To install a memory module, reverse the removal procedures. NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. A DIMM must occupy the XMM1 socket. To create a dual-channel memory configuration, the memory capacity of Channel A must equal the memory capacity of Channel B. Refer to Populating DIMM Sockets on page 46 for more information. 48 Chapter 7 Removal and Replacement Procedures - Microtower Chassis
4.
Open both latches
(1)
of the memory module socket , and remove the memory module from the
socket
(2)
.
Figure 7-4
Removing a DIMM
To install a memory module, reverse the removal procedures.
NOTE:
A memory module can be installed in only one way. Match the notch on the module with the
tab on the memory socket.
A DIMM must occupy the XMM1 socket.
To create a dual-channel memory configuration, the memory capacity of Channel A must equal the
memory capacity of Channel B. Refer to
Populating DIMM Sockets
on page
46
for more information.
48
Chapter 7
Removal and Replacement Procedures – Microtower Chassis