HP ProBook 5320m HP ProBook 5320m Notebook PC Maintenance and Service Guide - Page 50

installed on the antenna connectors, as shown in the following illustration.

Page 50 highlights

Removal and replacement procedures 4. Remove the WLAN module by pulling it away from the slot at an angle. ✎ WLAN modules are designed with a notch to prevent incorrect insertion of the WLAN module into the WLAN module slot. ✎ If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. 4-16 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133

4–16
Maintenance and Service Guide
Removal and replacement procedures
4. Remove the WLAN module by pulling it away from the slot at an angle.
WLAN modules are designed with a notch to prevent incorrect insertion of the WLAN module into the
WLAN module slot.
If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be
installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.