HP ProBook 5320m HP ProBook 5320m Notebook PC Maintenance and Service Guide - Page 68
Release the ZIF connector, Disconnect the display panel cable
![]() |
View all HP ProBook 5320m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removal and replacement procedures Remove the system board: 1. Turn the computer upside down, with the front toward you. 2. Disconnect the SD Card Reader board cable from the system board. 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 5. Disconnect the speaker cable 1 from the system board. 6. Disconnect the display panel cable 2 from the system board. 7. Release the ZIF connector 3 to which the power button board board cable is attached, and then disconnect the cable from the system board. 8. Disconnect the power cable 4 from the system board. 4-34 Maintenance and Service Guide
![](/manual_guide/products/hewlettpackard-probook-5320m-hp-probook-5320m-notebook-pc-maintenance-service-guide-41c60f4/68.png)
4–34
Maintenance and Service Guide
Removal and replacement procedures
Remove the system board:
1. Turn the computer upside down, with the front toward you.
2. Disconnect the SD Card Reader board cable from the system board.
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Disconnect the speaker cable
1
from the system board.
6. Disconnect the display panel cable
2
from the system board.
7. Release the ZIF connector
3
to which the power button board board cable is attached, and then disconnect the
cable from the system board.
8. Disconnect the power cable
4
from the system board.