HP ProBook 5320m HP ProBook 5320m Notebook PC Maintenance and Service Guide - Page 58
One Phillips PM2.5×2.0 broadhead screw, Two Torx T8M2.5×5.0 screws
View all HP ProBook 5320m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Removal and replacement procedures Remove the keyboard: 1. Position the computer with the front toward you. 2. Remove the following screws: ❏ Two Torx T8M2.5×5.0 screws 1 in the mass storage device bay and the wireless module compartment ❏ One Phillips PM2.5×2.0 broadhead screw 2 in the battery bay 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 5. Slide the keyboard 1 back until it rests on the display. 6. Lift the rear edge of the keyboard 2 until it rests at an angle. 4-24 Maintenance and Service Guide
4–24
Maintenance and Service Guide
Removal and replacement procedures
Remove the keyboard:
1. Position the computer with the front toward you.
2. Remove the following screws:
❏
Two Torx T8M2.5×5.0 screws
1
in the mass storage device bay and the wireless module compartment
❏
One Phillips PM2.5×2.0 broadhead screw
2
in the battery bay
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Slide the keyboard
1
back until it rests on the display.
6. Lift the rear edge of the keyboard
2
until it rests at an angle.