HP ProBook 5320m HP ProBook 5320m Notebook PC Maintenance and Service Guide - Page 72

Replacement thermal material is included with all system board and heat sink spare part kits.

Get HP ProBook 5320m - Notebook PC PDF manuals and user guides View all HP ProBook 5320m manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Removal and replacement procedures ✎ The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board each time the heat sink is removed: ❏ Thermal paste is used on the processor 1 and the heat sink section 2 that services it. ❏ Thermal pads are used on the Northbridge chip 3 and the heat sink section 4 that services it. Replacement thermal material is included with all system board and heat sink spare part kits. 5. Lift the fan straight up to remove it from the heat sink. (The fan is attached to the heat sink with double-sided tape.) Reverse this procedure to install the fan and heat sink. 4-38 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
4–38
Maintenance and Service Guide
Removal and replacement procedures
✎
The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board
each time the heat sink is removed:
❏
Thermal paste is used on the processor
1
and the heat sink section
2
that services it.
❏
Thermal pads are used on the Northbridge chip
3
and the heat sink section
4
that services it.
Replacement thermal material is included with all system board and heat sink spare part kits.
5. Lift the fan straight up to remove it from the heat sink. (The fan is attached to the heat sink with
double-sided tape.)
Reverse this procedure to install the fan and heat sink.