HP ProBook 5320m HP ProBook 5320m Notebook PC Maintenance and Service Guide - Page 98
File > Restore Defaults, File > Save Changes and Exit, Use the arrow keys to select - screen replacement
View all HP ProBook 5320m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Computer Setup Your changes go into effect when the computer restarts. Restoring factory settings in Computer Setup ✎ Restoring defaults will not change the hard drive mode. To return all settings in Computer Setup to the values that were set at the factory, follow these steps: 1. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. 2. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select File > Restore Defaults. 4. Follow the on-screen instructions. 5. To save your changes and exit, click the Save icon in the lower-left corner of the screen, and then follow the on-screen instructions. - or - Use the arrow keys to select File > Save Changes and Exit, and then press enter. Your changes go into effect when the computer restarts. ✎ Your password settings and security settings are not changed when you restore the factory settings. Computer Setup menus The menu tables in this section provide an overview of Computer Setup options. ✎ Some of the Computer Setup menu items listed in this chapter may not be supported by your computer. File menu Select System Information Restore Defaults Reset BIOS security to factory default Ignore Changes and Exit Save Changes and Exit To do this ■ View identification information for the computer and the batteries in the system. ■ View specification information for the processor, memory size, system ROM, video revision, keyboard controller version, and wireless identification version. Replace the configuration settings in Computer Setup with the original factory settings. (Hard drive mode, password settings, and security settings are not changed when you restore the factory settings.) Resets password to the factory default in case of a forgotten password. Cancel any changes entered during the current session. Then exit and restart the computer. Save any changes entered during the current session. Then exit and restart the computer. Your changes go into effect when the computer restarts. 5-14 Maintenance and Service Guide