HP ProBook 635 Maintenance and Service Guide - Page 45
Solid-state drive, Remove the bottom cover
View all HP ProBook 635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Replace the cover by inserting the edges of the cover into the clips on the system board that surround the memory modules (1). Solid-state drive To remove the M.2 solid-state drive, use this procedure and illustration. Table 5-3 Solid-state drive descriptions and part numbers Description 1 TB, PCIe, TLC 512 GB, PCIe, TLC 512 GB, PCIe, value 256 GB, PCIe, TLC 256 GB, PCIe, value 128 GB, SATA-3, TLC Solid-state drive cover (included in Miscellaneous Parts Kit) Spare part number L85348-001 L85360-001 L85364-001 L85350-001 L85354-001 L85346-001 M33155-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Disconnect the battery cable from the system board (see Battery on page 38). Component replacement procedures 35