HP ProBook 635 Maintenance and Service Guide - Page 56
Fingerprint reader board
View all HP ProBook 635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Lift the back of the board up, and then remove board from computer (4). Reverse this procedure to install the USB board. Fingerprint reader board To remove the fingerprint reader board, use this procedure and illustration. Table 6-8 Fingerprint reader board description and part number Description Fingerprint reader board Fingerprint reader board cable (included in Cable Kit) Fingerprint reader board bracket Spare part number M03434-001 M30646-001 M30665-001 Before removing the fingerprint reader board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the battery (see Battery on page 38). Remove the fingerprint reader board: 1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket to the computer, and then remove the bracket (2). 2. Disconnect the cable from the ZIF connector on the fingerprint reader board (3). 46 Chapter 6 Removal and replacement procedures for authorized service provider parts