HP ProDesk 600 G5 Maintenance and Service Guide - Page 43
-inch hard cage, If it is necessary to remove the bottom hard drive from the 2.5-inch drive cage
View all HP ProDesk 600 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
7. If it is necessary to remove the top hard drive from the 2.5-inch drive cage, follow the 1, 2, 3, 4 sequence (1) stamped in the cage to remove the four Torx-15 M3.0×7.5 screws (2) that secure the hard drive to the cage. 8. Remove the hard drive from the 2.5-inch hard cage (3). 9. If it is necessary to remove the bottom hard drive from the 2.5-inch drive cage, follow the 1, 2, 3, 4 sequence (1) stamped in the cage to remove the four Torx-15 M3.0×7.5 screws (2) that secure the hard drive to the cage. 10. Remove the hard drive from the 2.5-inch hard cage (3). Reverse this procedure to install the hard drives and the 2.5-inch hard drive cage. Hard drives 35
7.
If it is necessary to remove the top hard drive from the 2.5-inch drive cage, follow the 1, 2, 3, 4
sequence
(1)
stamped in the cage to remove the four Torx-15 M3.0×7.5 screws
(2)
that secure the hard
drive to the cage.
8.
Remove the hard drive from the
2.5-inch hard cage
(3)
.
9.
If it is necessary to remove the bottom hard drive from the 2.5-inch drive cage, follow the 1, 2, 3, 4
sequence
(1)
stamped in the cage to remove the four Torx-15 M3.0×7.5 screws
(2)
that secure the hard
drive to the cage.
10.
Remove the hard drive from the
2.5-inch hard cage
(3)
.
Reverse this procedure to install the hard drives and the 2.5-inch hard drive cage.
Hard drives
35