HP ProDesk 600 G5 Maintenance and Service Guide - Page 53
System board
![]() |
View all HP ProDesk 600 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
System board NOTE: The system board spare park kit includes replacement thermal material. Follow these steps to remove the system board: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 30). 2. Remove the access panel (see Access panel on page 31), and then remove the following components: a. Front bezel (see Front bezel on page 33) b. Drive cage (see Drive cage on page 36) c. Shroud (see Fan shroud on page 40) d. Fan-sink (see Fan-sink on page 41) NOTE: When replacing the system board, be sure that the processor (see Processor on page 42) and connector board (see Connector board on page 48) are removed from the defective system board and installed on the replacement system board. 3. Disconnect the following cables from the system board: (1) Speaker cable (2) Power supply P1 cable (3) Power supply P2 cable (4) Serial connector module cable System board 45
![](/manual_guide/products/hewlettpackard-prodesk-600-g5-maintenance-service-guide-5dc3727/53.png)