HP ProLiant 6400R Compaq ProLiant 6400R Servers - Page 48
Memory
View all HP ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Removal and Replacement Procedures 2-31 Memory The standard shipment of ProLiant 6400R servers have either 256 K or 1 GB of memory (four 64-MB or 256-MB DIMMs in bank 1). Memory is expandable to 4-GB (16x256-MB DIMMs). Four memory banks of four DIMMs are supported. ProLiant 6400R Servers support 60 ns or faster (ships with 50 ns), and 32-, 64-, 128-, or 256-MB error checking and correcting, EDO or 4-K or 8-K refreshed DIMMs. DIMM 3 DIMM 4 DIMM 7 DIMM 8 DIMM 11 DIMM 12 DIMM 15 DIMM 16 Bank 1 Bank 2 Bank 3 Bank 4 DIMM 1 DIMM 2 DIMM 5 DIMM 6 DIMM 9 DIMM 10 DIMM 13 DIMM 14 Figure 2-28. Memory banks on the memory board CAUTION: Use only Compaq approved DIMMs. DIMMs from other sources may adversely affect data integrity. Power-On Self-Test (POST) will warn of nonsupported DIMMs. The recommended DIMM replacement order is: Bank 1 - DIMM 1, DIMM 2, DIMM 3, DIMM 4 Bank 2 - DIMM 5, DIMM 6, DIMM 7, DIMM 8 Bank 3 - DIMM 9, DIMM 10, DIMM 11, DIMM 12 Bank 4 - DIMM 13, DIMM 14, DIMM 15, DIMM 16 The following guidelines must be followed when replacing memory: Supports 60 ns or faster and 32-, 64-, 128-, or 256-megabyte, ECC, EDO, or 4-K or 8-K refreshed DIMMs. NOTE: This server does not support Fast Page DIMMs. DIMMs must be installed or removed one bank (four identical DIMMs) at a time. The size and speed of each DIMM of a given bank must be identical. Table 2-5 shows some of the possible memory upgrade configurations for ProLiant 6400R servers.