HP ProLiant 6400R Compaq ProLiant 6400R Servers - Page 81

Slot x Drive Array Option ROM is Not Programmed Correctly or may Conflict

Get HP ProLiant 6400R PDF manuals and user guides View all HP ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

3-14 Compaq ProLiant 6400R Maintenance and Service Guide Table 3-2 POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 1767-Slot x Drive Array Option ROM is Not Programmed Correctly or may Conflict with the Memory Address Range of an ISA Card. Check the Memory Address Configuration of installed ISA Card(s) or run Options ROMPaq Utility to attempt SMART-2/E Option ROM Reprogramming. 1768-Slot x Drive Array-Resuming logical drive expansion process. None SMART-2 Controller error. A controller reset or power cycle occurred during the expansion. 1769-Slot x Drive Array - Drive(s) disabled due to failure during expand. Select F1 to continue with logical drives disabled. Select F2 to accept data loss and to re-enable logical drives. None SMART-2 Controller error. Data lost while expanding the array. The drives have been temporarily disabled. 1771-Primary Disk Port Address Assignment Conflict None Internal and external hard drive controllers are both assigned to the primary address. 1772-Secondary Disk Port Address Assignment Conflict None Address assignment conflict. Internal and external hard drive controllers are both assigned to the secondary address. 1773-Primary Fixed None Fixed-disk drive error Disk Port Assignment Conflict Recommended Action Remove or reconfigure conflicting ISA cards, especially any not recognized by the System Configuration Utility. Reprogramming the ROM on the SMART-2/E Controller, using the latest Options ROMPaq (version 2.29 or later). No action required. Press F2 to accept the data loss and re-enable the logical drives. Restore data from the backup. Run the System Configuration Utility and correct. Run the System Configuration Utility and correct. Run the System Configuration Utility and correct. continued

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
3-14
Compaq ProLiant 6400R Maintenance and Service Guide
Table 3-2
POST Error Messages
continued
Error Code
Audible Beeps
Probable Source of Problem
Recommended Action
1767-Slot x Drive Array Option ROM is Not Programmed Correctly or may Conflict
with the Memory Address Range of an ISA Card. Check the Memory Address
Configuration of installed ISA Card(s) or run Options ROMPaq Utility to attempt
SMART-2/E Option ROM Reprogramming.
Remove or reconfigure
conflicting ISA cards, especially
any not recognized by the
System Configuration Utility.
Reprogramming the ROM on the
SMART-2/E Controller, using the
latest Options ROMPaq
(version 2.29 or later).
1768-Slot x Drive
Array-Resuming
logical drive
expansion process.
None
SMART-2 Controller error. A
controller reset or power cycle
occurred during the expansion.
No action required.
1769-Slot x Drive
Array - Drive(s)
disabled due to
failure during
expand. Select F1 to
continue with logical
drives disabled.
Select F2 to accept
data loss and to
re-enable logical
drives.
None
SMART-2 Controller error. Data
lost while expanding the array.
The drives have been temporarily
disabled.
Press
F2
to accept the data loss
and re-enable the logical drives.
Restore data from the backup.
1771-Primary Disk
Port Address
Assignment Conflict
None
Internal and external hard drive
controllers are both assigned to
the primary address.
Run the System Configuration
Utility and correct.
1772-Secondary
Disk Port Address
Assignment Conflict
None
Address assignment conflict.
Internal and external hard drive
controllers are both assigned to
the secondary address.
Run the System Configuration
Utility and correct.
1773-Primary Fixed
Disk Port Assignment
Conflict
None
Fixed-disk drive error
Run the System Configuration
Utility and correct.
continued