HP ProLiant ML110 ProLiant ML110 Generation 2 Server Maintenance and Service G - Page 80
Rear Panel LED Indicators, S.M.A.R.T. Function, To activate the S.M.A.R.T. function
View all HP ProLiant ML110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Connectors, Switches, and LEDs S.M.A.R.T. Function Self-Monitoring Analysis and Reporting Technology or S.M.A.R.T. is an interface function between the system BIOS and the SATA hard drive. When enabled BIOS receives information from the SATA drive that allows the former to send a warning message of possible hard drive failure. To activate the S.M.A.R.T. function: 1. Turn on the monitor and the server. If the server is already turned on, save your data and exit all open applications, then restart the server. 2. During POST, press F10. If you fail to press F10 before POST is completed, you will need to restart the server. 3. Under the Main menu click IDE Channel 0 Master. 4. Set the SMART Monitoring option to Enabled. 5. Press F10 to save the changes you made and close the PhoenixBIOS Setup Utility. Rear Panel LED Indicators The LAN port on the rear panel has two LED indicators that allow monitoring of network activity. Figure 4-10 and Table 4-7 show and describe the function of these LEDs. Figure 4-10: LAN LED indicators 4-12 HP ProLiant ML110 Generation 2 Server Maintenance and Service Guide