HP ProLiant MicroServer Gen8 HP ProLiant MicroServer Gen8 User Guide - Page 18
Install the front bezel
View all HP ProLiant MicroServer Gen8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2. Release the bezel hinges from the front panel. Install the front bezel 1. If the chassis cover was removed, install it ("Install the chassis cover" on page 19). 2. Attach the bezel to the front panel, and then close it. 3. If the chassis cover was removed, do the following: a. Connect the power cord to the server ("Connecting the power cord" on page 28). b. Press the Power On/Standby button. The server exits standby mode and applies full power to the system. The system power LED changes from amber to green. Operations 18
Operations 18
2.
Release the bezel hinges from the front panel.
Install the front bezel
1.
If the chassis cover was removed, install it ("
Install the chassis cover
" on page
19
).
2.
Attach the bezel to the front panel, and then close it.
3.
If the chassis cover was removed, do the following:
a.
Connect the power cord to the server ("
Connecting the power cord
" on page
28
).
b.
Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.