HP ProLiant MicroServer Gen8 HP ProLiant MicroServer Gen8 User Guide - Page 7
Front panel LEDs and buttons - ilo
View all HP ProLiant MicroServer Gen8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Front panel LEDs and buttons Item 1 2 3 4 Description Power On/Standby button and system power LED NIC status LED Drive status LED Health LED Status Solid green = System on Flashing green (1 Hz/cycle per sec) = Performing power on sequence Solid amber = System in standby Off = No power present* Solid green = Link to network Flashing green (1 Hz/cycle per sec) = Network active Off = No network activity Solid green = System on Flashing green = Drive activity Off = System in standby or no power present Solid blue = Normal Flashing amber = System degraded Flashing red (1 Hz/cycle per sec) = System critical Fast-flashing red (4 Hz/cycles per sec) = Power fault** * Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the power button cable is disconnected. ** To identify components in a degraded or critical state, see the iLO/BIOS logs and the server troubleshooting guide. Component identification 7