HP ProLiant MicroServer Gen8 HP ProLiant MicroServer Gen8 User Guide - Page 3

Contents Component identification ...6 Front panel components ...6 Front panel LEDs and buttons ...7 Rear panel components...8 Rear panel LEDs and buttons...9 System board components ...9 DIMM slot locations ...11 System maintenance switch...11 NMI functionality...12 Drive numbering ...12 FBWC module LED definitions...13 Fan location ...14 T-10/T-15 Torx screwdriver ...14 Operations...15 Power up the server ...15 Power down the server...15 Open the front bezel...16 Remove the front bezel...17 Install the front bezel...18 Remove the chassis cover ...19 Install the chassis cover ...19 Remove the system board assembly ...20 Install the system board assembly ...22 Setup...23 Optional installation services ...23 Optimum environment ...23 Space and airflow requirements ...23 Temperature requirements...24 Power requirements ...24 Electrical grounding requirements ...24 Server warnings and cautions ...25 Identifying the server box contents ...25 Installing hardware options...25 Connecting peripheral devices ...26 Connecting the Ethernet cable...26 Connecting the power cord ...28 Powering on and selecting boot options ...29 Performing the initial system setup ...30 Registering the server ...34 Setting up the HP PS1810-8G Switch (optional 34 Hardware options installation...41 Introduction ...41 Bezel faceplate ...41 Drive options ...43 Contents 3