HP ProLiant SL4545 HP ProLiant SL4500 Series Chassis Maintenance and Service G - Page 50
I/O module on System fans
![]() |
View all HP ProLiant SL4545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2. Disconnect the cable management arm (on page 33). 3. Disconnect all cables from the rear of the chassis. 4. Remove the following components: a. Power supplies (on page 37) b. System fans (on page 36) c. I/O module (on page 38) d. Management module (on page 37) e. Drives (on page 43) f. Node ("Remove a node from the chassis" on page 32) g. Drive backplanes ("Drive backplane" on page 44) 5. Place the chassis on a flat, level surface. 6. Use the Allen wrench to loosen the captive screws securing the midplane cover to the chassis. Removal and replacement procedures 50
![](/manual_guide/products/hewlettpackard-proliant-sl4545-hp-proliant-sl4500-series-chassis-maintenance-service-guide-a1759f7/50.png)
Removal and replacement procedures
50
2.
Disconnect the cable management arm (on page
33
).
3.
Disconnect all cables from the rear of the chassis.
4.
Remove the following components:
a.
Power supplies (on page
37
)
b.
System fans (on page
36
)
c.
I/O module (on page
38
)
d.
Management module (on page
37
)
e.
Drives (on page
43
)
f.
Node ("
Remove a node from the chassis
" on page
32
)
g.
Drive backplanes ("
Drive backplane
" on page
44
)
5.
Place the chassis on a flat, level surface.
6.
Use the Allen wrench to loosen the captive screws securing the midplane cover to the chassis.