HP ProLiant SL4545 HP ProLiant SL4500 Series Chassis Maintenance and Service G - Page 53
Midplane assembly (2 node chassis), Remove the following components
![]() |
View all HP ProLiant SL4545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
To replace the component, reverse the removal procedure. Be sure to align the midplane using the guides provided. When replacing the midplane cover, tilt it in toward the front of the chassis, and then down to align the screw holes. Midplane assembly (2 node chassis) To remove the component: IMPORTANT: All components must be removed to service the midplane assembly. 1. Power down the nodes ("Power down the node" on page 30). 2. Disconnect the cable management arm (on page 33). 3. Disconnect all cables from the rear of the chassis. 4. Remove the following components: a. Power supplies (on page 37) b. System fans (on page 36) c. I/O modules ("I/O module" on page 38) d. Management module (on page 37) e. Drives (on page 43) f. Nodes ("Remove a node from the chassis" on page 32) Removal and replacement procedures 53
![](/manual_guide/products/hewlettpackard-proliant-sl4545-hp-proliant-sl4500-series-chassis-maintenance-service-guide-a1759f7/53.png)