HP Q1581A HP StorageWorks DAT SCSI Tape Drives user guide (Q1573 - 90905, Febr - Page 23
Other servers, Mounting screws
UPC - 882780612716
View all HP Q1581A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Mounting screws Other HP ProLiant server models, such as ML350 and ML370, only require the use of special locating screws with no mounting rail. Use a Torx screwdriver to attach the appropriate screws. You may need to purchase the M3 screws separately. Position the screws, as shown in Figure 7 on page 23. • HP ProLiant ML350: Use M3 mounting screws. These have a thicker head than the standard M3 screws. • HP ProLiant ML370: Use M3 offset mounting screws. These have a thick offset piece and a thicker head than the standard M3 screws. 1 2 1. M3 mounting screws 2. M3 offset mounting screws Figure 7 Attaching mounting screws Other servers Attach the appropriate mounting hardware. Refer to the manufacturer's documentation for instructions. • If you are installing on a server that requires a tray, place the tape drive in the tray. • If you are installing in a server that requires mounting rails, fasten the rails to the tape drive. • Some servers have snap-on mounting rails attached to the filler panel. These can be removed and attached to the tape drive with screws. DAT SCSI Tape Drives 23