HP Q1581A HP StorageWorks DAT SCSI Tape Drives user guide (Q1573 - 90905, Febr - Page 27
No mounting hardware used, Securing drive
![]() |
UPC - 882780612716
View all HP Q1581A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
No mounting hardware used 1. Use the M3 screws provided with the tape drive. Check that the holes in the chassis are aligned with the holes in the sides of the drive and use a regular Phillips screwdriver to secure the M3 screws, as shown in Figure 11 on page 27. 1. M3 screws, supplied with tape drive Figure 11 Securing drive, no mounting hardware used 2. Ensure blanking plates are in place over empty bays and replace the cover on the server. DAT SCSI Tape Drives 27
![](/manual_guide/products/hewlettpackard-c5686c-hp-storageworks-dat-scsi-tape-drives-user-guide-q1573-90905-2007-3b86baa/27.png)
No mounting hardware used
1.
Use the M3 screws provided with the tape drive. Check that the holes in the chassis are aligned
with the holes in the sides of the drive and use a regular Phillips screwdriver to secure the M3
screws, as shown in
Figure 11
on page 27.
1. M3 screws, supplied with tape drive
Figure 11 Securing drive, no mounting hardware used
2.
Ensure blanking plates are in place over empty bays and replace the cover on the server.
DAT SCSI Tape Drives
27