HP Server rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 125
DO NOT RESET, AC POWER CYCLE, Reinsert the Cell.
View all HP Server rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
CAUTION: Repeat the firmware update procedure immediately for all entities failing to update successfully. DO NOT RESET or AC POWER CYCLE until you get a message indicating that all updates have completed successfully. 6. Activate the new Firmware for all updated components by cycling power to the cell, following these specific steps: a. Eject the Cell. b. Reinsert the Cell. 7. Following the Cell AC power cycle, verify the updated firmware revisions by using the sysrev command. Example (rp8420 with SEU): MP:CM> sysrev Cabinet firmware revision report PROGRAMMABLE HARDWARE : System Backplane : GPM ------1.002 FM ------- 1.002 OSP ------- 1.002 PCI-X Backplane : LPM ------2.000 HS ------- 1.000 Core IO : Master -------2.009 Slave ------- 2.009 Cell 0 : Cell 1 : Cell 2 : Cell 3 : LPM ------- 1.002 1.002 1.002 1.002 PDHC ------- 1.007 1.007 1.007 1.007 FIRMWARE: Core IO Master : A.006.012 Event Dict. : 0.009 Slave : A.006.012 Event Dict. : 0.009 Cell 0 PDHC Pri SFW Sec SFW : A.003.023 : 21.003 (PA) : 21.003 (PA) Cell 1 PDHC Pri SFW Sec SFW : A.003.023 : 21.003 (PA) : 22.002 (PA) Cell 2 PDHC Pri SFW Sec SFW Cell 3 PDHC Pri SFW Sec SFW : A.003.023 : 21.003 (PA) : 22.002 (PA) : A.003.023 : 21.003 (PA) : 22.002 (PA) IO Cabinet FPGA and Firmware revision report System Backplane : GPM FM OSP ------- 1.002 1.002 1.002 PCI-X Backplane : LPM HS ------- ------- Removing and Replacing a Cell Board 125