HP Server rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 96
Instructions, Access Level: Administrator
View all HP Server rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Instructions • The user logs in to the server console through the LAN, local serial, or remote serial locations. • The user types the FW command to start the firmware update. NOTE: The LAN configuration for the server must be set for the FTP connection to function correctly regardless of whether the console LAN, local serial, or other connection is used to issue the FW command. FW-Firmware Update • Access Level: Administrator • Scope: Complex • Description: This command prompts the user for the location of the firmware software and the FLASH handle (from a list) which represents all upgradeable entities. DFW-Duplicate Firmware • Access Level: Administrator • Scope: Complex • Description: This command allows field support personnel to copy firmware already installed on the system to an equivalent entity in the same complex. Figure 5-11 illustrates the output and questions requiring responses. After the user replies Y to the confirmation request, the firmware update makes the connection to the FTP server at the IP address given using the user and password details supplied. The appropriate files will be downloaded and burned into the selected flash memories. Note that the firmware update validates the image to determine that the image name supplied is that of a valid image type before burning the image into the flash memory. 96 Troubleshooting