HP Spectre 12-c000 Maintenance and Service Guide - Page 34

Bottom bezel, unplugging the power cord from the AC outlet, and then

Get HP Spectre 12-c000 PDF manuals and user guides View all HP Spectre 12-c000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

3. Detach the Touchscreen board (3) from the display panel assembly. (The Touchscreen board is attached to the display panel assembly with double-sided adhesive.) 4. Remove the Touchscreen board. Reverse this procedure to install the Touchscreen board. Bottom bezel Description Bottom bezel Spare part number 924167-001 Before removing the bottom bezel, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display panel assembly on page 20). Remove the bottom bezel: 1. Remove the four Phillips PM2.0×3.8 screws (1) that secure the bottom bezel to the back cover. 2. Remove the two Phillips PM2.0×2.2 screws (2) that secure the bottom bezel to the back cover. 24 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
3.
Detach the Touchscreen board
(3)
from the display panel assembly. (The Touchscreen board is attached
to the display panel assembly with double-sided adhesive.)
4.
Remove the Touchscreen board.
Reverse this procedure to install the Touchscreen board.
Bottom bezel
Description
Spare part number
Bottom bezel
924167-001
Before removing the bottom bezel, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is
off
or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
Display panel assembly
on page
20
).
Remove the bottom bezel:
1.
Remove the four Phillips PM2.0×3.8 screws
(1)
that secure the bottom bezel to the back cover.
2.
Remove the two Phillips PM2.0×2.2 screws
(2)
that secure the bottom bezel to the back cover.
24
Chapter 5
Removal and replacement procedures