HP Spectre 12-c000 Maintenance and Service Guide - Page 41

Fan, Remove the fan

Get HP Spectre 12-c000 PDF manuals and user guides View all HP Spectre 12-c000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Fan Description Fan (includes cable) Spare part number 924174-001 Before removing the fan, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display panel assembly on page 20). 5. Remove the bottom bezel (see Bottom bezel on page 24). 6. Remove the battery (see Battery on page 25). Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the three Phillips PM2.0×2.8 screws (2) that secure the fan to the back cover. 3. Remove the fan (3). Reverse this procedure to install the fan. Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
Fan
Description
Spare part number
Fan (includes cable)
924174-001
Before removing the fan, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is
off
or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
Display panel assembly
on page
20
).
5.
Remove the bottom bezel (see
Bottom bezel
on page
24
).
6.
Remove the battery (see
Battery
on page
25
).
Remove the fan:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Remove the three Phillips PM2.0×2.8 screws
(2)
that secure the fan to the back cover.
3.
Remove the fan
(3)
.
Reverse this procedure to install the fan.
Component replacement procedures
31