HP Spectre 12-c000 Maintenance and Service Guide - Page 46
Right speaker
View all HP Spectre 12-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
1. Release the ZIF connector (1) to which the volume button board cable is connected, and then disconnect the volume button board cable from the system board. 2. Remove the Phillips PM1.5×2.2 screw (2) that secures the volume button board to the back cover. 3. Remove the volume button board (3). Reverse this procedure to install the volume button board. Right speaker Description Right speaker (includes cable) Spare part number 924846-001 Before removing the right speaker, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display panel assembly on page 20). 5. Remove the bottom bezel (see Bottom bezel on page 24). 6. Remove the battery (see Battery on page 25). 7. Remove the right bezel (see Kickstand on page 32). Remove the right speaker: 36 Chapter 5 Removal and replacement procedures