HP Spectre 12-c000 Maintenance and Service Guide - Page 65
Infrared LED board cable
View all HP Spectre 12-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Infrared LED board cable Description Infrared LED board cable (includes double-sided adhesive) Spare part number 924168-001 Before removing the infrared LED board cable, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display panel assembly on page 20), and then remove the following components: a. Bottom bezel (see Bottom bezel on page 24) b. Battery (see Battery on page 25) c. Fan (see Fan on page 31) d. Microphones (see Microphones on page 38) e. Webcams (see Webcams on page 40) f. Heat sink (see Heat sink on page 44) g. System board (see System board on page 46) h. Wireless antenna (see Wireless antenna on page 50) Remove the infrared LED board cable: 1. Release the ZIF connector (1) to which infrared LED board cable is connected, and then disconnect the infrared LED board cable from the system board. 2. Release the ZIF connector (2) to which infrared LED board cable is connected, and then disconnect the infrared LED board cable from the infrared LED board. Component replacement procedures 55