HP Spectre 12-c000 Maintenance and Service Guide - Page 47
Power button board, Remove the display panel assembly see
View all HP Spectre 12-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
1. Release the ZIF connector (1) to which the power button board cable is connected, and then disconnect the power button board cable from the system board. 2. Disconnect the right speaker cable (2) from the system board. 3. Remove the right speaker (3). Reverse this procedure to install the right speaker. Power button board Description Power button board (includes cable) Spare part number 924169-001 Before removing the power button board, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display panel assembly on page 20), and then remove the following components: a. Bottom bezel (see Bottom bezel on page 24) b. Battery (see Battery on page 25) c. Right bezel (see Kickstand on page 32) d. The right speaker (see Right speaker on page 36) Component replacement procedures 37