HP Spectre 12-c000 Maintenance and Service Guide - Page 40

POGO pin connector cable, Remove the Phillips PM1.5×2.2 screw

Get HP Spectre 12-c000 PDF manuals and user guides View all HP Spectre 12-c000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

POGO pin connector cable Description Display panel cable (includes double-sided adhesive) Spare part number 924173-001 Before removing the POGO pin connector cable, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display panel assembly on page 20). 5. Remove the bottom bezel (see Bottom bezel on page 24). 6. Remove the battery (see Battery on page 25). Remove the POGO pin connector cable: 1. Disconnect the POGO pin connector cable (1) from the system board. 2. Detach the POGO pin connector cable (2) from the back cover. (The POGO pin connector cable is attached to the back cover with double-sided adhesive in two locations.) 3. Remove the Phillips PM1.5×2.2 screw (3) that secures the POGO pin connector to the back cover. 4. Remove the POGO pin connector cable (4). 5. Remove the POGO pin connector cable. Reverse this procedure to install the POGO pin connector cable. 30 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
POGO pin connector cable
Description
Spare part number
Display panel cable (includes double-sided adhesive)
924173-001
Before removing the POGO pin connector cable, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is
off
or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
Display panel assembly
on page
20
).
5.
Remove the bottom bezel (see
Bottom bezel
on page
24
).
6.
Remove the battery (see
Battery
on page
25
).
Remove the POGO pin connector cable:
1.
Disconnect the POGO pin connector cable
(1)
from the system board.
2.
Detach the POGO pin connector cable
(2)
from the back cover. (The POGO pin connector cable is attached
to the back cover with double-sided adhesive in two locations.)
3.
Remove the Phillips PM1.5×2.2 screw
(3)
that secures the POGO pin connector to the back cover.
4.
Remove the POGO pin connector cable
(4)
.
5.
Remove the POGO pin connector cable.
Reverse this procedure to install the POGO pin connector cable.
30
Chapter 5
Removal and replacement procedures