HP Spectre 12-c000 Maintenance and Service Guide - Page 36
Solid-state drive
View all HP Spectre 12-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3. Remove the battery (3). Reverse this procedure to install the battery. Solid-state drive Description 1-TB, PCIe-3×4 NVMe solid-state drive with TLC 512-GB, PCIe-3×4 NVMe solid-state drive with TLC 360-GB, PCIe-3×4 NVMe solid-state drive with TLC 256-GB, PCIe-3×4 NVMe solid-state drive with TLC 128-GB, PCIe-3×4 NVMe solid-state drive with TLC Spare part number 920540-001 920539-001 920542-001 920538-001 920541-001 Before removing the solid-state drive, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display panel assembly on page 20). 5. Remove the bottom bezel (see Bottom bezel on page 24). 6. Remove the battery (see Battery on page 25). Remove the solid-state drive: 26 Chapter 5 Removal and replacement procedures