HP Spectre 13-af000 Maintenance and Service Guide - Page 40
Battery, disconnect the battery cable from the system board
View all HP Spectre 13-af000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Battery Description 4-cell, 43-Wh, 2.52-Ah, Li-ion battery (includes cable, battery tape, and thermal shielding material) Battery tape Spare part number 924960-855 924960-855 Before removing the battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). Remove the battery: 1. Remove the thermal shielding material (1) that secures the solid-state drive to the battery. 2. Release the zero insertion force (ZIF) connector (2) to which the battery cable is connected, and then disconnect the battery cable from the system board 3. Detach the battery cable (3) from the keyboard/top cover. (The battery cable is attached to the keyboard/ top cover with adhesive.) 4. Remove the four Phillips M1.5×4.7 screws (4) that secure the battery to the keyboard/top cover. 5. Remove the battery (5). Reverse this procedure to install the battery. 32 Chapter 5 Removal and replacement procedures