HP Spectre 13-af000 Maintenance and Service Guide - Page 61

Audio jack board, that secures the audio jack board to the keyboard/top cover.

Get HP Spectre 13-af000 PDF manuals and user guides View all HP Spectre 13-af000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Audio jack board NOTE: The audio jack board spare part kit does not include the audio jack board cable. The audio jack board cable is available using spare part number 941844-001. Description Audio jack board Spare part number 941843-001 Before removing the audio jack board, follow these steps: 1. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 2. Disconnect all external devices from the computer. 3. Remove the bottom cover (see Bottom cover on page 30), and then remove the following components: a. Battery (see Battery on page 32) b. Fans (see Fans on page 40) c. System board (see System board on page 42) d. Left speaker (see Speakers on page 50) Remove the audio jack board: 1. Remove the Phillips M2.0×3.2 screw (1) that secures the audio jack board to the keyboard/top cover. 2. Lift the front edge of the audio jack board (2) until it rests at an angle. 3. Remove the audio jack board (3) by sliding it up and forward at an angle. Reverse this procedure to install the audio jack board. Component replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Audio jack board
NOTE:
The audio jack board spare part kit does not include the audio jack board cable. The audio jack board
cable is available using spare part number 941844-001.
Description
Spare part number
Audio jack board
941843-001
Before removing the audio jack board, follow these steps:
1.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
2.
Disconnect all external devices from the computer.
3.
Remove the bottom cover (see
Bottom cover
on page
30
), and then remove the following components:
a.
Battery (see
Battery
on page
32
)
b.
Fans (see
Fans
on page
40
)
c.
System board (see
System board
on page
42
)
d.
Left speaker (see
Speakers
on page
50
)
Remove the audio jack board:
1.
Remove the Phillips M2.0×3.2 screw
(1)
that secures the audio jack board to the keyboard/top cover.
2.
Lift the front edge of the audio jack board
(2)
until it rests at an angle.
3.
Remove the audio jack board
(3)
by sliding it up and forward at an angle.
Reverse this procedure to install the audio jack board.
Component replacement procedures
53