HP Spectre 13-af000 Maintenance and Service Guide - Page 53
Heat sink, Disconnect all external devices from the computer.
View all HP Spectre 13-af000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
8. Disconnect the WLAN antenna cables (4) from the WLAN module built onto the system board. NOTE: The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/ black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal. 9. Remove the system board. Reverse this procedure to install the system board. Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description For use only on computer models equipped with an Intel Core i7-8565U processor or an Intel Core i5-8265U processor For use only on computer models equipped with an Intel Core i7-8550U processor or an Intel Core i5-8250U processor Spare part number L40675-001 941826-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 30), and then remove the following components: a. Battery (see Battery on page 32) b. Fans (see Fans on page 40) c. System board (see System board on page 42) Component replacement procedures 45