HP Spectre 13-af000 Maintenance and Service Guide - Page 48
Fans, Disconnect the right fan cables
View all HP Spectre 13-af000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5. Remove the TouchPad (3) by sliding it up and back at an angle. Fans Reverse this procedure to install the TouchPad. Description Left fan (includes cable) Right fan (includes cable) Spare part number 941827-001 941828-001 Before removing the fans, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Disconnect the battery cable from the system board (see Battery on page 32). Remove the right fan: 1. Disconnect the right fan cables (1) from the connectors on the system board. 2. Remove the two Phillips M2.0×3.2 screws (2) that secure the right fan to the keyboard/top cover. 40 Chapter 5 Removal and replacement procedures