HP Spectre 13-af000 Maintenance and Service Guide - Page 41

Solid-state drive, Remove the Phillips M2.0×1.8 screw

Get HP Spectre 13-af000 PDF manuals and user guides View all HP Spectre 13-af000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Solid-state drive NOTE: The solid-state drive spare part kit includes replacement thermal material and thermal shielding material. Description 2-TB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC 1-TB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC 512-GB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC 360-GB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC 256-GB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC Spare part number L22026-001 941850-001 941853-001 941852-001 941851-001 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Disconnect the battery cable from the system board (see Battery on page 32). Remove the solid-state drive: 1. Remove the thermal shielding material (1) that secures the solid-state drive to the battery. 2. Remove the Phillips M2.0×1.8 screw (2) that secures the solid-state drive to the solid-state drive bracket. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Solid-state drive
NOTE:
The solid-state drive spare part kit includes replacement thermal material and thermal shielding
material.
Description
Spare part number
2-TB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC
L22026-001
1-TB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC
941850-001
512-GB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC
941853-001
360-GB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC
941852-001
256-GB, M.2 2280-SATA-3/DS, PCIe, NVMe, solid-state drive with TLC
941851-001
Before removing the solid-state drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
30
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
32
).
Remove the solid-state drive:
1.
Remove the thermal shielding material
(1)
that secures the solid-state drive to the battery.
2.
Remove the Phillips M2.0×1.8 screw
(2)
that secures the solid-state drive to the solid-state drive bracket.
Component replacement procedures
33