HP Spectre 13-ap0000 Maintenance and Service Guide - Page 46
Fingerprint Reader
View all HP Spectre 13-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Fingerprint Reader Description Fingerprint Reader for use in dark ash silver models Fingerprint reader for use in Poseidon blue models Spare part number L37672-001 L37673-001 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 34). 5. Remove the battery (see Battery on page 35). 6. Remove the TouchPad. Remove the fingerprint reader: 1. Disconnect the fingerprint reader cable from the computer (1). 2. Remove the two Phillips M1.6×2.0-I screws securing the fingerprint reader to the keyboard/top cover (2). 3. Remove the fingerprint reader (3). Reverse this procedure to install the fingerprint reader. 38 Chapter 5 Removal and replacement procedures for authorized service provider parts